The special design of the extension shaft assembly allows for convenient installation on all types of low side room garage doors.
Standard Lift
Size, Weight & Height:
- Up To 18 M²
- Up To 234 Kgs
High Lift
Size, Weight & Height:
- Up To 18 M²
- Up To 234 Kgs
Vertical Lift
Size, Weight & Height :
- Up To 14 M²
- Up To 182 Kgs
DC 35 Motor
x 1
Wired Push Button
x 1
Power Cable
x 1
Extension Emergency Release Cord
x 1
Mounting Bracket Kit
x 1
Manual
x 1
| MAXIMUM OUTPUT TORQUE | 35NM |
|---|---|
| RATED OUTPUT TORQUE | 25NM |
| INPUT VOLTAGE | 110/220(1+10%)V 50HZ |
| CONTROL SYSTEM | 24V DC |
| MOTOR POWER | 0.35KW |
| STATIC HOLDING TORQUE | 400NM |
| MAX. OUTPUT SPEED | 24RPM - 32RPM |
| OPERATION LIMIT TURNS (LIMIT TRAVEL) | 15 TURNS OF OUTPUT SHAFT (MAX. 5.0M LIFTING HEIGHT RECOMMENDED) |
| SLEEVE SHAFT DIAMETER (STANDARD) | Φ25.4MM |
| KEYWAY SIZE | 6.3MM |
| THERMAL PROTECTION TEMPERATURE | 105℃ |
| CONTINUOUS SOUND PRESSURE LEVEL | ＜70DB |
| MAX. CYCLES PER HOUR | 20 |
| IP PROTECTION CLASS | IP54 |
| TEMPERATURE RANGE | - 20℃ ~ + 60℃ |
| STANDARD KIT | DRIVE MOTOR & PUSH BUTTON OR TX/RX CONTROL |
| QUICK RELEASE WITH ROPE | INCLUDED |
| CHAIN HOIST MODULE | NONE |
| OPTIONAL EDGE SENSORS KIT | OPTIONAL |
BRING A SAFER EFFECT TO DOORS
For general inquiries use the contact form below to drop us an email.